Description
City and well water pressure can range from 30 to 55 PSI, water pressure for an RO system is between 65 to 75 PSI and thus the more efficient the RO system will be …. So Super Charge your RO Units, drive the output quantity and water quality too new heights.
The Booster Pump kit can supply .5 gpm. at 70 psi to your system, everything you will ever need is included, You can use the Booster Pump to drive 35 – 150 gallon per day systems.
You do not have to re-plumb your system, simply connect the Booster Pump Kit in the water supply line and connect your RO Unit inlet to it.
Connections are quick connect. This is an “on-demand” system which shuts itself down once the desired psi water pressure has been achieved.
Features:
Sediment filter stops small dirt particles that could ruin your pump.
In-line check valve prevents higher pressure water from backing up into your plumbing
The .5 gpm @ 75 quiet running booster pump .Please limit pressure to 75 psi.
Adjustable high pressure cut out switch. You need an Allen wrench to make the adjustment. We are supplying you with an entire set. The pumps maximum capacity of 100PSI needs to be reduced? downward.
Our exclusive flow control locking needle valve to balance your existing presssure with the boosted pump water pressure
Low voltage transformer
A water pressure gauge which is stainless liquid filled
You can be up and running in no time at all. We have connected and hooked up everything and supplied everything you need . This is a virtual plug & play system.
Most RO systems can expect a 20-30 psi boost in water pressure . Do not use with systems larger than (150) gpd .
$25 Flat Rate Shipping (NO EXPRESS SHIPPING)